Lead2pass 300-320 Dumps PDF Free Download:

https://www.lead2pass.com/300-320.html

QUESTION 11
Which Cisco feature can be run on a Cisco router that terminates a WAN connection, to gather and provide WAN circuit information that helps switchover to dynamically back up the WAN circuit?

A.    Cisco Express Forwarding
B.    IP SLA
C.    passive interface
D.    traffic shaping

Answer: B

QUESTION 12
Which protocol is best when there are circuit connections with two different ISPs in a multihoming scenario?

A.    VRRP
B.    BGP
C.    IPsec
D.    SSL

Answer: B

QUESTION 13
Private lines make use of which connection type based on cell switching?

A.    ATM
B.    ISP MPLS VPN
C.    VTI
D.    VPLS

Answer: A

QUESTION 14
Refer to the exhibit. Which functionality must be enabled on router A to connect two networks for translating private addresses into “legal” public addresses on a one-for-one basis?

A.    PAT
B.    NAT
C.    VLAN
D.    GARP
E.    PPP

Answer: B

QUESTION 15
Which technology fulfills these requirements?

– Utilize a connection that must support a range of traffic, voice, video, and data.
– This traffic must also support transmission via a fixed blank 53-byte cell.

A.    PPP
B.    Frame Relay
C.    ATM
D.    MPLS
E.    X.25

Answer: C

QUESTION 16
Which option is used as a top-of-rack device that is managed by its parent device, providing ease of management?

A.    Cisco Nexus 2000
B.    Cisco Nexus 5000
C.    Cisco Nexus 7000
D.    Cisco Nexus 9000

Answer: A

QUESTION 17
Which option provides software modularity in Cisco NX-OS software in the data center design?

A.    The ip routing command enables all of the features in the Cisco NX-OS.
B.    All of the features are enabled by default in the Cisco NX-OS.
C.    Individual features must be manually enabled to start the process.
D.    The Cisco NX-OS has a management VRF that is enabled by default.

Answer: C

QUESTION 18
What is an advantage of using the vPC feature in a data center environment?

A.    VSS is a requirement.
B.    Multiple instances of control plane are formed.
C.    The control plane and management plane remain separate.
D.    Cisco FabricPath technology does not have to be configured.

Answer: C

QUESTION 19
Which option is a benefit of the vPC+ feature?

A.    Cisco FabricPath is not required in the network domain.
B.    This feature provides fault domain separation.
C.    Nonfabric devices, such as a server or a classic Ethernet switch, can be connected to two fabric switches that are configured with vPC.
D.    The control plane and management plane are combined into one logical plane.

Answer: C

QUESTION 20
A network administrator wants to provide high availability in a data center environment by making sure that there is no reconvergence of Layer 2 and Layer 3 protocols when there is a Layer 3 switch failure. Which Cisco Nexus feature fulfills this purpose?

A.    ISSU
B.    VSS
C.    vPC
D.    MEC

Answer: C

300-320 dumps full version (PDF&VCE): https://www.lead2pass.com/300-320.html

Large amount of free 300-320 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDUGlzdWdZNHUwZ28

You may also need:

300-101 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDbHBiVVk1ZVhpOGc

300-115 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDM0pqaFJWUXVuM2M

Free Updated Lead2pass 300-210 Exam Dumps Download:

https://www.lead2pass.com/300-210.html

QUESTION 31
Which Cisco monitoring solution displays information and important statistics for the security devices in a network?

A.    Cisco Prime LAN Management
B.    Cisco ASDM Version 5.2
C.    Cisco Threat Defense Solution
D.    Syslog Server
E.    TACACS+

Continue reading →

Free Lead2pass Cisco 300-209 Dumps VCE Download:

https://www.lead2pass.com/300-209.html

QUESTION 11
A user is unable to establish an AnyConnect VPN connection to an ASA. When using the Real-Time Log viewer within ASDM to troubleshoot the issue, which two filter options would the administrator choose to show only syslog messages relevant to the VPN connection? (Choose two.)

A.    Client’s public IP address
B.    Client’s operating system
C.    Client’s default gateway IP address
D.    Client’s username
E.    ASA’s public IP address

Continue reading →

Lead2pass 300-208 New Questions For Passing The 300-208 Certification Exam:

https://www.lead2pass.com/300-208.html

QUESTION 11
Refer to the exhibit. If the given configuration is applied to the object-group vpnservers, during which time period are external users able to connect?

Continue reading →

Latest 300-206 Dumps PDF Free Download In Lead2pass:

https://www.lead2pass.com/300-206.html

QUESTION 11
For which purpose is the Cisco ASA CLI command aaa authentication match used?

A.    Enable authentication for SSH and Telnet connections to the Cisco ASA appliance.
B.    Enable authentication for console connections to the Cisco ASA appliance.
C.    Enable authentication for connections through the Cisco ASA appliance.
D.    Enable authentication for IPsec VPN connections to the Cisco ASA appliance.
E.    Enable authentication for SSL VPN connections to the Cisco ASA appliance.
F.    Enable authentication for Cisco ASDM connections to the Cisco ASA appliance.

Continue reading →

Lead2pass 300-180 New Questions Free Download:

https://www.lead2pass.com/300-180.html

QUESTION 61
Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech- support command output information about the Cisco UCS domain? (Choose two.)

A.    TFTP
B.    FTP
C.    SCP
D.    Telnet
E.    SecureTelnet

Continue reading →

Cisco Exam 300-175 PDF Dump Free Download In Lead2pass:

https://www.lead2pass.com/300-175.html

QUESTION 11
Which option describes the possible result of a customer configuring a server pool that contains Cisco UCS B200 M2 and B250 M2 blades?

A.    A service profile cannot migrate automatically from one blade to another blade within the server pool due
to hardware failure.
B.    You must decommission a blade server for the associated service profile to migrate to another blade in the
server pool successfully.
C.    You must uncheck the Restrict Migration box in the service profile to allow service profile migration between
blades in the server pool.
D.    After service profile migration, the server fails in boot from SAN due to differences in PCI device IDs.

Continue reading →

Lead2pass Offering Free 300-170 Dumps Files For Free Downloading By 300-170 Exam Candidates:

https://www.lead2pass.com/300-170.html

QUESTION 41
You are trouble shooting node discovery issues by using the acidiag fnvread command.
Which description of the node status when the CLI output shows a status of Discovering is true?

A.    The node is decommissioned
B.    The node ID is configured, but not discovered yet
C.    The node is discovered, but an IP address is not assigned yet
D.    The node is discovered, but the node ID policy is not configured yet

Continue reading →

Lead2pass Cisco 300-135 Exam Dumps Free Download:

https://www.lead2pass.com/300-135.html

QUESTION 11
Refer to the shown below.

%LINK-3-UPDOWN: Interface Serial0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up

What statement is correct regarding the output shown in the graphic?

A.    These two log messages will not have a severity level.
They are not errors but are just informational messages.
B.    The first log message is categorized as a warning message.
C.    These messages regarding interface status are normal output and will always be displayed when you exit config mode.
D.    The first log message is an error message with a severity level of 3.
E.    The second message would be shown if the logging console warning command had been issued.

Continue reading →

Lead2pass 2018 New Cisco 300-115 Braindump Free Download:

https://www.lead2pass.com/300-115.html

QUESTION 11
Which technique automatically limits VLAN traffic to only the switches that require it?

A.    access lists
B.    DTP in nonegotiate
C.    VTP pruning
D.    PBR

Continue reading →

100% Free Lead2pass 300-085 New Questions Download:

https://www.lead2pass.com/300-085.html

QUESTION 11
By default, what are two options that are presented to callers for forwarded calls into a Cisco Unity Connection system? (Choose two.)

A.    Log in to their mailbox.
B.    Listen to the opening greeting.
C.    Leave a message if forwarder has a mailbox.
D.    Enter user ID and PIN.
E.    Log in to remote mailbox.

Continue reading →

Easily Pass 300-075 Exam With Lead2pass New Cisco 300-075 Brain Dumps:

https://www.lead2pass.com/300-075.html

QUESTION 11
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20. the Cisco Telepresence MCU. and the Cisco Jabber Telepresence for Windows.

SX20 System information: Continue reading →